Workflows

de Bruin et al. Workflow 1 (1)

• Download

This is "Workflow 1" from de Bruin et al., Mol. Cell. Proteomics 2012.

Created: 2012-08-01 | Last updated: 2012-08-01

Credits: Magnus Palmblad

Plasma Precipitation Analysis (1)

• Download

ABOUT THE WORKFLOW This workflow was used to analyze the data in a manuscript by Mostovenko et al. (2012, submitted), comparing proteins in the precipitate with those left in solution after organic solvent precipitation. However, the workflow is generally applicable in comparisons of any binary fractionation method in proteomics, where the fractions are analyzed by liquid chromatography-tandem mass spectrometry. The workflow identifies proteins by SpectraST spectral library search and X!Ta...

Created: 2012-07-31 | Last updated: 2012-07-31

Credits: Magnus Palmblad Kate Mostovenko Yassene

Find Duplicates using Matchbox command lin... (1)

• Download

The workflow takes a list of digital documents as input, extracts SIFT features using image processing algorithms, creates dictionary of visual words, generates BoW (Bag of Words) histogramms and finds duplicates. The count of parallel threads can be passed as a parameter. Finally search results are stored in a text file that contains a list of possible duplicates with associated similarity score. This score values are spread between 0 (low similarity) and 1 (high similarity). Image compariso...

Created: 2012-07-31 | Last updated: 2012-07-31

Credits: Roman

Genome variant to Protein change (1)

• Download

Reports protein change, given a genomic variant, using mutalyzer

Created: 2012-07-27 | Last updated: 2012-10-29

Credits: Helen Hulme

Extract SDSS field information and PSF (5)

• Download

This workflow gathers information needed by the execution of Sextractor, Galfit and Ellipse, from the SDSS VO service. It receives two inputs: 1) An ascii table with information about the image such as data of the field, name of the fits file or if it is barred or not. 2) A configuration file with the paths where the files needed by the workflow can be found and other paths where to store the files generated by the workflow This workflow extracts the band from the image header, and the info...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Susana

Check the content of the Registry for mism... (1)

• Download

This workflow check for tables which are registered in the HELIO registry but not available in the HFC and for tables which are in the UOC but which are not registred.

Created: 2012-07-26

Credits: Anja Le Blanc

Adjusting galaxy parameters using galfit (4)

• Download

This workflow creates galfit configuration files using data from a votable, it runs galfit, its results is added to the votable, it creates new config files for galfit using the previous results, it runs galfit a second time considering galaxies that have and do not have bars in order to adjust the objective parameters and it finally includes the results into the votable. It requires the specification of the columns that contain file names (these files should be accesibles from taverna). If t...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Attributions: Create configuration files from a template and a votable Run galfit using a votable Create votable from galfit results Create votable from different galfit paramenter adjustments Create galfit configuration files with partition criteria using votable

Create galfit configuration files with par... (1)

• Download

This workflow creates galfit configuration files using a partition criteria. The resulting configuration files are different depending on whether the galaxy has o doesn't have a bar. They are created (one for every row in the votable) using a template whose keys are replaced by data from a votable. Keys must appear also in the vocabulary file and match column names in the votable. A column in the votable must contain the name of the result configuration file. This workflow uses astrotaverna ...

Created: 2012-07-26 | Last updated: 2012-07-26

Credits: Julian Garrido

Create votable from galfit results (4)

• Download

The workflow creates a votable from the results provided by galfit. It returns this table and an aditional table that is joined to the input table. It requires a votable that contains a column with the file name resulting from running galfit and such files must be accesible from taverna. It uses astrotaverna plugin (http://wf4ever.github.com/astrotaverna/) and it has a dependency on stil library (http://www.star.bris.ac.uk/~mbt/stil/).

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Run galfit using a votable (2)

• Download

It runs galfit and adjust the paramenters specified. This workflow has a dependency on the stil library (http://www.star.bris.ac.uk/~mbt/stil/). Galfit is called by a bash script as 'galfit'. Galfit is called for every row in the votable. Columns where the result file name and the configuration file name are defined must be especified. These files should be accesibles from taverna. ExperimentFolder provides the root folder for the experiment. If the configuration files contain references to o...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Ajusting galaxy paramenters using sextractor (5)

• Download

This workflow creates configuration files for sextractor, it runs sextractor using this configuration files, it adds sextractor results to the input votable and adds new calculated columns. This task requires a votable as input, a template, a vocabulary and the specification of the column names that contain some required files (configuration files, image files, ...). These files must be accesible from taverna. Sextractor is called by an bash script as 'sex'. Every row in the votable cotains ...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Attributions: Create configuration files from a template and a votable Run sextractor using a votable Create votable from sextractor results Add columns to a votable resulting from executing sextractor.

Create votable from sextractor results (2)

• Download

The workflow creates a votable from the results provided by sextractor (votables). It returns this table and an aditional table that is joined to the input table. It requires a votable that contains a column with the file name resulting from running sextractor and such files accesible from taverna. It uses astrotaverna plugin (http://wf4ever.github.com/astrotaverna/).

Created: 2012-07-26 | Last updated: 2012-08-21

Credits: Julian Garrido

Run sextractor using a votable (2)

• Download

It runs sextractor and adjust the paramenters specified. This workflow has a dependency on the stil library (http://www.star.bris.ac.uk/~mbt/stil/). Sextractor is called by an bash script as 'sex'. Sextractor is called for every row in the votable. Columns where the configuration file and the image file name are defined must be especified. These files should be accesibles from taverna. ExperimentFolder provides the root folder for the experiment. If the configuration files contain refer...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

13C NMR spectra prediction (2)

• Download

This workflow can be used to predict the 13C NMR spectra of a molecule. The generation of the structure of the molecule is done using the IUPAC to Structure node that uses OPSIN to convert the name of the molecule to a structure. Alternativelly, one can read the structure from a file. The spectra prediction is based on the NMRShiftDB implementation and the data used is also from NMRShiftDB. The atom topological environments were represented as Atom Signatures and used to calculate the checmia...

Created: 2012-07-26 | Last updated: 2012-08-10

Credits: Ldpf

Create configuration files from a template... (1)

• Download

This workflow uses astrotaverna artifacts. It creates files by using a template whose keys are replaced by data from a votable. A configuration file is created for every row in the votable. The keys must appear also in the vocabulary file and match column names in the votable. A column in the votable must contain the name of the result configuration file.

Created: 2012-07-26 | Last updated: 2012-09-04

Credits: Julian Garrido

Check the content of the Registry for mism... (1)

• Download

This workflow check for tables which are registered in the HELIO registry but not available in the UOC and for tables which are in the UOC but which are not registred.

Created: 2012-07-25

Credits: Anja Le Blanc

Check registry for wrongly registed and un... (2)

• Download

HELIO registry contains a list of tables available in the HEC. The HEC contains a table with available talbes itself. This workflow shows the differences between these two lists.

Created: 2012-07-24 | Last updated: 2012-07-24

Credits: Anja Le Blanc

RTTS Mapper (1)

• Download

Generates RTTS counts file from SAM file. Output consists of three columns: counts at given position;chromosome;position(0 based). Workflow removes untemplated nucleotides from 5' ends of the reads. Authors: Jeppe Vinther, Lukasz Kielpinski Workflow published by lukaszkielpinski on Galaxy Jun 26, 2012 imported to myExperiment Jul 17, 2012 during demonstration of Galaxy-myExperiment integration (specifically generating SVG and showing steps of more complex workflow).

Created: 2012-07-17 | Last updated: 2012-07-17

Transform 'Stitch Gene blocks' FASTA block... (1)

• Download

Converts FASTA blocks to a FASTA file. Workflow published by galaxyproject on Galaxy Jun 27, 2012 imported to myExperiment Jul16, 2012 during demonstration of Galaxy-myExperiment integration  https://main.g2.bx.psu.edu/u/galaxyproject/w/transform-stitch-gene-blocks-fasta-blocks-to-standardized-fasta-file

Created: 2012-07-16 | Last updated: 2012-07-16

Basic Illumina Reads Quality (Functional G... (1)

• Download

From the RNA-Seq analysis tutorial during the Functional Genomics Workshop 2012 https://caps.osu.edu/pfg-workshop Workflow published by mejia-guerra on Galaxy Jun 22, 2012 imported to myExperiment Jul16, 2012 during demonstration of Galaxy-myExperiment integration

Created: 2012-07-16 | Last updated: 2012-07-16

Basic RNA-Seq Analysis - Differential Expr... (1)

• Download

From the RNA-Seq analysis tutorial during the Functional Genomics Workshop 2012 https://caps.osu.edu/pfg-workshop Workflow published by mejia-guerra on Galaxy Jun 22, 2012 imported to myExperiment Jul16, 2012 during demonstration of Galaxy-myExperiment integration  

Created: 2012-07-16 | Last updated: 2012-07-16

AnnotationTimes (1)

• Download

This very simple workflow was used in the analysis of the metadata produced by the human annotation phase of the SALAMI (Strucural Analysis of Large Amounts of Music Inforamtion) project.  The input data is the metadata available from http://ddmal.music.mcgill.ca/salami/annotations It produces a histogram of song durations and scatterplot of combined annotation time verus song duration. The fields are   SONG_ID                   Un...

Created: 2012-07-16 | Last updated: 2012-07-16

Example of how to use Sesame service and V... (1)

• Download

This workflow needs as input a list of names of galaxies. Then it queries Sesame services to get the coordinates of this galaxies, and finally with this coordinates queries a Virtual Observatory Services (a cone service).

Created: 2012-07-14

Gene to Pathways (Vistrails) (1)

• Download

This is a Vistrails workflow that returns the pathways of a given gene ID. In doing so, it uses two kegg services.

Created: 2012-07-10

Credits: Khalid Belhajjame

Gene to Pathways (1)

• Download

This is a Taverna workflow that given a gene ID fetches the corespondondings pathways. To do so, the workflow make use of two KEGG web services.

Created: 2012-07-09 | Last updated: 2012-07-10

Credits: Khalid Belhajjame

List Concept Sets (3)

• Download

Pupose: The workflow returns a list of all Concept Set IDs currently available in the database. The Concept Sets have an hierarchical structure that can be inferred by referring to the parent Concept Set ID.

Created: 2012-07-06 | Last updated: 2014-07-14

Credits: Kristina Hettne Marco Roos Reinout van Schouwen Martijn Schuemie BioSemantics

Get concept information (5)

• Download

The workflow takes a (list of) concept ID(s) as input and returns the profile, ID, definition and name of the concept.

Created: 2012-07-06 | Last updated: 2014-07-14

Credits: Kristina Hettne Reinout van Schouwen Marco Roos Martijn Schuemie BioSemantics

Get Concept IDs (5)

• Download

Purpose: The workflow retrieves the concepts within a concept set. The Web service/workflow currently returns no values (bug).

Created: 2012-07-06 | Last updated: 2014-07-14

Credits: Kristina Hettne Reinout van Schouwen Martijn Schuemie Marco Roos BioSemantics

Task Data Pattern (BeanShell) (1)

• Download

This is a sample implementation of "Task Data" pattern intoduced workflowPatterns.com It defines a variable inside a Beanshell and uses the passed value through the processors input. Details: http://www.workflowpatterns.com/patterns/data/visibility/wdp1.php

Created: 2012-07-06

Get all applications available on the HPS (1)

• Download

This workflow requests all available applications on the HPS which do not require authentication to run. No inputs. Outputs contain all information to execute the application on the HPS such as the ID of the application and the names of all parameters.

Created: 2012-07-03

Credits: Anja Le Blanc

VOTable of NED Images from a List of Objects (1)

• Download

Extraction of metadata using NED Image Virtual Observatory Service into a single VOTable, providing a list of objects and the width for each field in arcmin. Among the most relevant metadata are the URL link to the FITS images. This Wf makes use of a Tool developed as an internal pyhton script file.

Created: 2012-07-01 | Last updated: 2012-07-01

Credits: Jose Enrique Ruiz

Attributions: Astronomical object name to equatorial coordinates Resolver

Astronomical object name to equatorial coo... (1)

• Download

 Resolve equatorial coordinates of a list of objects (names) with AstroTaverna plugin

Created: 2012-06-30 | Last updated: 2012-07-01

Credits: Jose Enrique Ruiz

Simple executable plan example (1)

• Download

A simple executable plan containing a migration action component and a QA component. The migration action uses imagemagick convert. The QA component consists of two characterisation components (fits) and another QA components (imagemagick compare).

Created: 2012-06-29

Credits: Markus Plangg

VOTables from NED Web Services (1)

• Download

Extraction of a sample of VOTables from all the NED Web Services present in paper 2007ASPC..382..165M Web-based Tools - NED VO Services (Mazzarella, J. M.; NED Team). The National Virtual Observatory: Tools and Techniques for Astronomical Research. ASP Conference Series, Vol. 382. Edited by M.J. Graham, M.J. Fitzpatrick, and T.A. McGlynn. San Francisco: Astronomical Society of the Pacific, 2007., p.165

Created: 2012-06-28 | Last updated: 2013-04-12

Credits: Jose Enrique Ruiz

SNP_ID2EntrezGene_ID (4)

• Download

Purpose: The workflow maps a SNP (dbSNP id) to a gene (EntrezGene id). Author comments: The window for gene inclusion can be set using the set_width parameter. This workflow can be used together with other workflows in this pack: http://www.myexperiment.org/packs/282 for functional gene and SNP annotation and knowledge discovery.

Created: 2012-06-26 | Last updated: 2013-03-11

Credits: Kristina Hettne Harish Dharuri

Online update recommendation web service V2 (1)

• Download

 After some arbitrary number of recommendations to specific users, system has to update recommendations in item recommendation table. This is accomplished by calling the online update recommendation web service, which updates the recommendation model in RapidAnalytics repository and updates the recommendations for specific users in item recommendation table.

Created: 2012-06-20 | Last updated: 2012-06-20

Offline update recommendation web service V2 (1)

• Download

  Periodically we have to do a full re-training on whole train set by the offline update recommendation web service.

Created: 2012-06-20 | Last updated: 2012-06-20

Gene enhancer region analysis (1)

• Download

 This Galaxy pipeline searches for transciption factor binding sites which are conserved through to Fugu. It then finds genes associated with these enhancer binding sites. See http://screencast.g2.bx.psu.edu/MAF_manipulation for the screencast that describes how this workflow is developed.

Created: 2012-06-14 | Last updated: 2012-07-06

Advanced FastQ manipulation (1)

• Download

 This Galaxy workflow performs advanced FastQ manipulation as demonstrated by the screencast at http://screencast.g2.bx.psu.edu/quickie_14_fastq_adv/flow.html. Given a FastQ set of data, it will be transformed using the tools, Groomer, Filter FastQ, FastQ Trimmer, Manipulate FastQ before it is finally converted into FASTA format.

Created: 2012-06-14 | Last updated: 2012-06-14

Perform QC on FastQ data (1)

• Download

 This Galaxy pipeline performs quality control analyses on FastQ data. A report is generated which provides various measures of the quality of the sequence reads.

Created: 2012-06-14 | Last updated: 2012-06-14

Gaussian Blur (1)

• Download

Convolves the image with a Gaussian kernel wherein the Gaussian has a standard deviation specified by the user ("sigma") and the kernel width in each dimension is 6 times the standard deviation of the Gaussian. You can find more details here

Created: 2012-06-13 | Last updated: 2012-06-13

galaxy_101 (2)

• Download

  This is a Galaxy pipeline written using the Galaxy 101 tutorial (https://main.g2.bx.psu.edu/galaxy101). The pipeline involves retrieving genome and SNP data from UCSC for a particular chromosome. These data are integrated in order to find exons with the highest number of SNPs.

Created: 2012-06-13 | Last updated: 2012-06-14

Credits: Peter Li

Image Characterisation - Fits (Extended) (1)

• Download

Extracts metadata from images.

Created: 2012-06-06 | Last updated: 2012-06-06

Credits: Markus Plangg

TextualAttributeExtraction for Recommender... (1)

• Download

This workflow takes conent data from VideoLectures.Net Recommender System Challenge and extractes word-vectors for each lecture. Latent semantic analysis with Singular Value Decomposition is done on item-word binary matrix. The last step is the binomializaiton of dataset.

Created: 2012-06-03

Evaluating semantic kernel with k-NN class... (1)

• Download

This workflow uses k-NN classifier to evaluate quality of EL++ Convolution Kernel [1]. As a dataset one of the examples from DL-Learner project [2] is used. After preparing knowledge base with "Build Knowledge Base", the item to item distance matrix is computed with "Calculate Gram/Distance Matrix". Such a matrix is then used as an input to 10-fold cross-validation with k-NN as an classifier and average result is delivered. [1] L. Józefowski, A. Lawrynowicz, J...

Created: 2012-05-30 | Last updated: 2012-06-07

Semantic clustering with k-Medoids and ALC... (1)

• Download

 This workflow loads data from a configuration file for DL-Learner (http://dl-learner.org) and uses ALCN Semantic Kernel [1] to cluster those data with k-Medoids algorithm. [1] N. Fanizzi, C. d’Amato, F. Esposito. Learning with Kernels in Description Logics. ILP 2008  

Created: 2012-05-30 | Last updated: 2012-06-07

Clustering data from DBpedia using AHC (1)

• Download

 This workflow uses Aglomerative Hierarchical Clustering algorithm to build hierarchy of clusters on data downloaded from DBpedia, the semantic version of Wikipedia. RDF data are downloaded from SPARQL endpoint and merged with DBpedia ontology by "Build Knowledge Base". Set of items to cluster is selected with "SPARQL Selector" and later they are clustered by "Agglomerative Hierarchical Clustering" with distance measure induced by the Bloehdorn Kernel [1]. ...

Created: 2012-05-30 | Last updated: 2012-06-07

Anatomical Atlas Generation (1)

• Download

Computes an anatomical atlas based on a set of patient images using registration methods. This workflow is automatic and does not require user interaction. The anatomical atlas is composed of a mean image and the set of transformations for each patient's between the mean image and the patient image. The atlas can be used to segment the mean image once and propagate the segmentation results to each patient image automatically. This workflow has been tested using GIMIAS-1.5 (open source) with ...

Created: 2012-05-29 | Last updated: 2012-05-29

Credits: Gimias

Convert table to CDS format (1)

• Download

It converts a csv file (comma separated values) to the CDS format. It also provides relevant information to create the ReadMe file. The first row in the input file must be the column names. If you want to run this workflow, you have to install astrotaverna plugin. You can easyly cusomize the workflow to provide a votable or fits table as input.

Created: 2012-05-28 | Last updated: 2012-05-28

Credits: Julian Garrido

Get data and images for a date +/- 12 hour... (1)

• Download

From the date as input date +/- 12 hours of data from the MLSO web page is collated. Images for up to three images (closest to date; -1; +1) are created via autoplot

Created: 2012-05-24 | Last updated: 2012-05-24

Credits: Anja Le Blanc