Workflows

EBI_InterProScan for Taverna 2 (2)

• Download

Perform an InterProScan analysis of a protein sequence using the EBI’s WSInterProScan service (see http://www.ebi.ac.uk/Tools/webservices/services/interproscan). The input sequence to use and the user e-mail address are inputs, the other parameters for the analysis (see Job_params) are allowed to default. InterProScan searches a protein sequence against the protein family and domain signature databases integrated into InterPro (see http://www.ebi.ac.uk/interpro/). A set of matches to the s...

Created: 2010-01-26 | Last updated: 2010-01-26

Credits: Stian Soiland-Reyes Paolo Katy Wolstencroft Hamish McWilliam

Attributions: EBI InterproScan T2 EBI_InterProScan

Protein_transmembrane_prediction (2)

• Download

Note: the WSInterProScan web service used by this workflow is no longer available haveing been replaced by the EMBL-EBI's InterProScan (REST) (http://www.ebi.ac.uk/Tools/webservices/services/pfa/iprscan_rest) and InterProScan (SOAP) (http://www.ebi.ac.uk/Tools/webservices/services/pfa/iprscan_soap) web services. Thus the workflow described here no longer works, see the alternative workflows for the InterProScan (SOAP) service for workflows which use the new services. Transmembrane and signal...

Created: 2008-10-26 | Last updated: 2011-04-01

Credits: Hamish McWilliam

Attributions: EBI_InterProScan_tmhmm_signalp EBI_Phobius tmap_single_sequence

EBI_InterProScan_tmhmm_signalp (4)

• Download

Note: the WSInterProScan web service used by this workflow is no longer available haveing been replaced by the EMBL-EBI's InterProScan (REST) (http://www.ebi.ac.uk/Tools/webservices/services/pfa/iprscan_rest) and InterProScan (SOAP) (http://www.ebi.ac.uk/Tools/webservices/services/pfa/iprscan_soap) web services. Thus the workflow described here no longer works, see the alternative workflows for the InterProScan (SOAP) service for workflows which use the new services. Use the TMHMM and Signal...

Created: 2008-10-26 | Last updated: 2011-04-01

Credits: Hamish McWilliam

Attributions: EBI_InterProScan

Indigo-pains (2)

• Download

If you like this workflow, please reference our paper doi:10.1002/minf.201100076, and check the related workflows Indigo-pains-recursive, and RDKit-pains.*** Update 20151130 - using KNIME 3 nodes and the 'RDKit' version of PAINS queries ***Implementation of the PAINS filters[1] using the Indigo (1.1.1300.201511201230) nodes in KNIME (3.0.1). Original PAINS filters were published in SLN format. his workflow contains the SMARTS form of the filters published by Greg Landrum as part of th...

Created: 2011-06-07 | Last updated: 2015-12-01

Credits: sauberns

Attributions: RDKit-pains

Genome annotation pipeline demonstrator wo... (2)

• Download

Part of a workflow by Hannah Tipney, adapted by Duncan Hull using GenScan, RepeatMasker and BLAST. http://dx.doi.org/10.1093/nar/gkl320

Created: 2007-10-03

RDKit-pains (4)

• Download

If you like this workflow, please reference our paper doi:10.1002/minf.201100076, and check the related workflows RDKit-pains-parallel, and Indigo-pains.*** Update 20151119 - using KNIME 3 and RDKit version of PAINS queries ***Implementation of the PAINS filters[1] using the RDKit (3.0.0.201511131320) nodes in KNIME (3.0.1). Original PAINS filters were published in SLN format. This workflow contains the SMARTS form of the filters published by Greg Landrum as part of the RDKit library[2], whic...

Created: 2011-02-07 | Last updated: 2015-11-19

Credits: sauberns

Attributions: Indigo-pains

Liliopsida Protein Alignment (6)

• Download

This workflow retrieves Liliopsida chloroplast petb gene sequences from NCBI Nucleotide, removes duplicate sequences and saves the results at BioExtract Server. These results are then converted into GenBank format and fed into Fetch Translation, which removes the translation from the CDS coding region. Translations are then used to build a multiple alignment using ClustalW.

Created: 2010-01-13 | Last updated: 2010-11-17

Credits: Carol Lushbough

fetchEnsemblSeqsAndBlast (1)

• Download

This workflow allows you to configure a BioMart query to fetch sequences you want from Ensembl. These sequences are retrieved and a blast database of them is created (by default, in the directory you ran taverna from). Warning: This workflow assumes that you have blastall and formatdb installed on the machine, and that by default, these are both found or linked in /usr/local/bin. It also assumes that you have write permission to the directory you have run taverna from. The beanshells "creat...

Created: 2008-04-18 | Last updated: 2008-04-18

Credits: Bela

Download from ChemSpider using Accurate Mass (2)

• Download

No description

Created: 2007-11-26 | Last updated: 2008-02-05

Credits: Egon Willighagen

Simplify a BLAST text file (2)

• Download

This workflow simplifies a BLAST text file into identifiers, descriptions and values (P, E-values). In order to extract the relevant ids etc. you need to pass the relevant string into the corresponding port, e.g. the default port being used is gi. This has been passed "gi". For any other ports simply pass in the string the SAME as the port name, e.g. seq_id, p, per etc.

Created: 2007-10-03 | Last updated: 2009-07-28

BioAID_ProteinDiscovery (8)

• Download

The workflow extracts protein names from documents retrieved from MedLine based on a user Query (cf Apache Lucene syntax). The protein names are filtered by checking if there exists a valid UniProt ID for the given protein name.

Created: 2010-05-10 | Last updated: 2013-08-16

Credits: Marco Roos AID

KEGG pathways common to both QTL and micro... (3)

• Download

This workflow takes in two lists of KEGG pathway ids. These are designed to come from pathways found from genes in a QTL (Quantitative Trait Loci) region, and from pathways found from genes differentially expressed in a microarray study. By identifying the intersecting pathways from both studies, a more informative picture is obtained of the candidate processes involved in the expression of a phenotype.   Example input for this workflow is given below (as newline separated values). qt...

Created: 2009-11-24 | Last updated: 2009-12-03

FLOSS Communication Centralization Plot, E... (4)

• Download

The analysis in this workflow represents the basis of the analysis in our paper, Social dynamics of FLOSS team communication across channels. This workflow uses WSDL components to select periodized data from the FLOSSmole database and generate sociomatrices. The workflow parses the threaded list structure into a communication network based on reply-to relationships. In the analysis process, an edge weighting is applied so that older messages receive less weight using an exponential decay fun...

Created: 2009-02-07

Credits: Andrea Wiggins Crowston James Howison

EBI_PICR_Sequence_to_UniParc_and_InterPro (2)

• Download

Given a protein sequence get some information about it: Does this protein sequence occur in any of the protein databases (e.g. UniProtKB, PDB, etc.). Using the PICR web service (see http://www.ebi.ac.uk/Tools/picr/) map the sequence to a UniParc identifer. Which entries in the protein databases have this sequence. Using the UniParc database (see http://www.ebi.ac.uk/uniprot/database/DBDescription.html#uniparc) a summary of the databases and the entries in those databases which have this s...

Created: 2008-06-08 | Last updated: 2008-06-08

Credits: Hamish McWilliam

Attributions: EBI_dbfetch_UniParc EBI_Fetch_InterPro_Matches_UniParc EBI_PICR_Sequence_to_ID

Fetch today's xkcd comic (1)

• Download

Use the local java plugins and some filtering operations to fetch the comic strip image from http://xkcd.com/ Based on the FetchDailyDilbert workflow.

Created: 2008-03-05 | Last updated: 2008-04-07

Credits: Tomoinn Stian Soiland-Reyes

Attributions:

Mouse Microarray Analysis (3)

• Download

This workflow takes in probesets from and AffyMetrix micorarray experiment and returns: the genes ; gene start and end positions; chromosome where genes reside; ensembl trasncripts; SwissProt ids; affy probeset identifiers for chips Mouse430_2 and Mouse430a_2. Example ids from the Mouse430_2 affymetrix array are as follows (newline separated): 1447227_at 1440624_at 1436240_at 1454904_at 1435665_at 1418148_at 1429831_at

Created: 2007-10-03 | Last updated: 2009-12-03

EBI InterProScan (2)

• Download

EBI InterProScan. Stop fannying around with BLAST and use InterProScan instead.

Created: 2007-10-03

EBI_NCBI_BLAST (1)

• Download

Perform a BLAST search using the EBI’s WSNCBIBlast service (see http://www.ebi.ac.uk/Tools/webservices/services/ncbiblast). The query sequence, database to search and BLAST program to use are inputs, the other parameters for the search (see Job_params) are allowed to default. Note: the WSNCBIBlast service used by this workflow is deprecated as of 21st September 2010 and should not be used in any new development. This service is will be retired during 2011. EBI's replacement NCBI BLA...

Created: 2008-05-31 | Last updated: 2010-12-06

Credits: Hamish McWilliam

SifterWorkflow_Prod_Neu (2)

• Download

Phylogenomic workflow with SIFTER. The workflow first runs an iterative Blast search against the RefSeq database (Pruitt et al. 2007) (only fully sequenced organisms) and filters the results to get putative orthologous and in-paralogous proteins. These sequences are used to build a multiple alignment with MAFFT (Katoh et al. 2005). After filtering out alignment columns with more than 60% gaps, a phylogenetic tree is build. If there are less than 20 proteins in the alignment Phyml (Guindon an...

Created: 2007-11-23 | Last updated: 2008-04-29

Credits: Anika Joecker

Translate Nucleotide sequence into Peptide... (2)

• Download

Translate Nucleotide sequence into Peptide sequence using EBI Service. Find nucleotide sequence from EBI wsdbfetch(using ref.seq Id NM_005700) 2. Translation nucleotide sequence(from 1) into peptide sequence using EBI EMBOSS4 transeq.

Created: 2007-10-03

Perform a search through NCBI eUtils eSearch (3)

• Download

This workflow takes in a search term and a database (e.g. snp, gene, protein) in which to perfom the search over. The result is an xml file containing summary information about the search term. Example input for this workflow are given below: database: pubmed terms: cancer AND diabetes

Created: 2009-11-27 | Last updated: 2009-12-03

EBI WU-BLAST with program and database sel... (3)

• Download

Run a BLAST analysis using the EBI's WSWUBlast service (see http://www.ebi.ac.uk/Tools/webservices/services/wublast). This workflow wraps the EBI_WU-BLAST workflow to provide a basic user interface which prompts for the required inputs: sequence, database, BLAST program and user e-mail. Other parameters (e.g. matrix, sort, gap penalties, etc.) are allowed to default. The values presented in the selection menus for the program and database are obtained from the service, using the provided me...

Created: 2009-07-04 | Last updated: 2010-12-06

Credits: Hamish McWilliam

Attributions: EBI_WU-BLAST

Retrieve sequence in EMBL format (3)

• Download

This workflow retrieves a sequence associated with its features in embl format

Created: 2009-06-17

Credits: Franck Tanoh Tomoinn Stuart Owen

EBI_ClustalW2_phylogentic_tree (2)

• Download

Create a Neighbor-joining phylogenetic tree, with Kimura distance corrections, from a sequence alignment using the EBI's WSClustalW2 service (see http://www.ebi.ac.uk/Tools/webservices/services/clustalw2).

Created: 2009-04-07

Credits: Hamish McWilliam