User: Anja Le Blanc

usability test workflow3 (1)

Created: 2014-07-11

Credits: Anja Le Blanc

Matching flare events to active regions (1)

• Download

No description

Created: 2012-11-01

Credits: Anja Le Blanc

Associate Active Regions and Filaments to ... (1)

• Download

This workflow is querying the HEC for the fastest 100 CME of a given list (input parameter); it calculates the latitude from the postion angle; last step is to query the HFC for Active Regions and Filaments for the given time where the bounding box of the feature contains the longitude (feature must be on the correct side of the Sun.) Inputs: HEC list name (must contain fields: v, time_start, pa_width, pa) Outputs: v, time_start, pa_width, pa of the 100 fastest CME, VOTables for associated A...

Created: 2012-09-03

Credits: Anja Le Blanc

Sort 1000 fastest CMEs from a given list a... (1)

• Download

The fastest 1000 CME of the input list are bined in categories by factor of 10 according to their pa_width value. List must contain fields v and pa_width. Output VOTable with the counts in the categories.

Created: 2012-08-30 | Last updated: 2012-08-30

Credits: Anja Le Blanc

Monthly counts for event occurences betwee... (1)

• Download

This workflow provides monthly counts of events in HEC between the beginning of year_start and the end of year_end. Returns the result as comma separated file (csv) and as list of lists.

Created: 2012-08-23

Credits: Anja Le Blanc

Attributions: Counts number of events per month in HEC table Split VOTable into its values

Counts number of events per month in HEC t... (1)

• Download

This workflow counts the monthly number of events in a HEC table from the begining of year year_start to the end of year year_end. Returns a VOTable with the count

Created: 2012-08-22

Credits: Anja Le Blanc

Monthly counts for feature occurences betw... (1)

• Download

This workflow provides monthly counts of features in HFC between the beginning of year_start and the end of year_end. Returns the result as comma separated file (csv) and as list of lists.

Created: 2012-08-22

Credits: Anja Le Blanc

Attributions: Number of recorded features in catalogue per month Split VOTable into its values

Number of recorded features in catalogue p... (1)

• Download

The number of features of the specified catalogue are counted per month between beginning of the year_start und the end of the year_end. Return format is VOTable

Created: 2012-08-22

Credits: Anja Le Blanc

Number of features in a month in a year (1)

• Download

Returns the number of features in a HFC catalogue which occured in a month in a year given as inputs.

Created: 2012-08-21

Credits: Anja Le Blanc

Check HEC instances for diverging content (2)

• Download

This workflow check all tables in HEC on festung1 and festung3 for diverging content by comparing the last 1000 entries in each table. Output is a list of tabel names with different content.

Created: 2012-08-20 | Last updated: 2012-08-20

Credits: Anja Le Blanc

Check the content of the Registry for mism... (1)

• Download

This workflow check for tables which are registered in the HELIO registry but not available in the HFC and for tables which are in the UOC but which are not registred.

Created: 2012-07-26

Credits: Anja Le Blanc

Check the content of the Registry for mism... (1)

• Download

This workflow check for tables which are registered in the HELIO registry but not available in the UOC and for tables which are in the UOC but which are not registred.

Created: 2012-07-25

Credits: Anja Le Blanc

Check registry for wrongly registed and un... (2)

• Download

HELIO registry contains a list of tables available in the HEC. The HEC contains a table with available talbes itself. This workflow shows the differences between these two lists.

Created: 2012-07-24 | Last updated: 2012-07-24

Credits: Anja Le Blanc

Get all applications available on the HPS (1)

• Download

This workflow requests all available applications on the HPS which do not require authentication to run. No inputs. Outputs contain all information to execute the application on the HPS such as the ID of the application and the names of all parameters.

Created: 2012-07-03

Credits: Anja Le Blanc

Get data and images for a date +/- 12 hour... (1)

• Download

From the date as input date +/- 12 hours of data from the MLSO web page is collated. Images for up to three images (closest to date; -1; +1) are created via autoplot

Created: 2012-05-24 | Last updated: 2012-05-24

Credits: Anja Le Blanc

Available instruments through DPAS which a... (1)

• Download

This workflow uses a DPAS servlet to obtain all available intrument keys in the DPAS (Data Provider Access Service) and formats the return as VOTable.

Created: 2012-03-16 | Last updated: 2012-03-16

Credits: Anja Le Blanc

Attributions: Available instruments through DPAS Split VOTable into its values

Check in UOC which instruments were observ... (2)

• Download

Query of the UOC to find the instrument_observatory keys for instruments which were observing at a given time period and a given location.

Created: 2012-03-15 | Last updated: 2012-03-15

Credits: Anja Le Blanc

Split VOTable into its values (1)

• Download

This workflow takes a single VOTable and splits it up in a vector for the names of fields, a vector for the UCDs of the fields, a vector for the UTypes of the fields, and a two dimensional vector for the values.

Created: 2012-03-14 | Last updated: 2012-03-14

Credits: Anja Le Blanc

Co-rotating Interaction Regions backwards ... (1)

• Download

Run the cir backwards propagation code on the HELIO processing service. Required inputs: time start of backwards propagation, the object (planet/spacecraft) from where the propagation should start, assumed solar wind speed at the time, assumed error of solar wind speed Output: VOTable with times at different points in solar system

Created: 2012-03-14 | Last updated: 2012-03-14

Credits: Anja Le Blanc

Propagation of the Solar Energetic Particl... (1)

• Download

use of the processing service to calculate time delays to the planets Inputs: time when propagation should start from the hit object hit_object where was the SEP event observed speed of the solar wind error value of solar wind speed beta traveling speed of energetic particals as percentage of the speed of light

Created: 2012-03-13 | Last updated: 2012-03-13

Credits: Anja Le Blanc

Associate SEP events at Earth with flare, ... (1)

• Download

This is the implementation of a use case worked on during CDAW3 of the HELIO project. SEP events propagated backward from Earth to the Sun. We allow for +- 30 min around the predicted time to search for flare events. The timing of the flare event informs the search time for Type III radio event (time_start to time_peak) and for the CME event (time_start to time_start+1h). Results are presented in a mulitlayered VOTable.

Created: 2012-03-13 | Last updated: 2012-03-13

Credits: Anja Le Blanc Rositsa

Attributions: Propagation of the Solar Energetic Particles to the Sun Extract content of columns from VOTables

Filter CME events to events which could ha... (1)

• Download

This workflow uses the initial time period to search for time periods where Earth and Mars are not further appart than 80 degrees. These time periods are used to find Halo CME events. The CME events are forward propagated to Earth and Sun. Only events were the propagation model predicts that both planets are on the propagation path will be included in the final VOTable

Created: 2012-02-29 | Last updated: 2012-02-29

Credits: Anja Le Blanc

Propagation of CME from the Sun (1)

• Download

Uses the processing service to calculate the objects (planets and observatories) which a CME might hit. Required longitude input is the longitude of the associated flare event.

Created: 2012-02-27 | Last updated: 2012-02-27

Credits: Anja Le Blanc

CME backwards propagation (1)

• Download

Workflow propagates an CME event from its observing point (planet/spacecraft) back to the sun. The propagation also provides the timing of this event at other points in space (planet/spacecraft)

Created: 2012-02-23 | Last updated: 2012-02-23

Credits: Anja Le Blanc

Propagation of the Solar Energetic Particl... (1)

• Download

use of the processing service to calculate time delays to the planets Inputs: time when propagation should start from the hit object hit_object where was the SEP event observed speed of the solar wind error value of solar wind speed beta traveling speed of energetic particals as percentage of the speed of light

Created: 2012-02-22 | Last updated: 2012-02-22

Credits: Anja Le Blanc

Run a Workflow on Taverna Server (local t2... (1)

Uses a local t2flow file to submit and run this workflow on the taverna server. You need a user name and password to execute this workflow. Input to the workflow which runs remotely will be requested interactively.

Created: 2012-02-20

Credits: Anja Le Blanc

Attributions: Run a Workflow on Taverna Server

Run a Workflow on Taverna Server (1)

Uses the URL to a t2flow file to submit and run this workflow on the taverna server. You need a user name and password to execute this workflow. Input to the workflow which runs remotely will be requested interactively.

Created: 2012-02-17 | Last updated: 2012-02-17

Credits: Anja Le Blanc

Radio lists search over time period (2)

• Download

This workflow searches the wind stereo II IV radioburst list, wind tyhpe II soho cme list, hfc radioburst type III list, tsrs solar radio event list and combines the return of these lists chronologically. Only time_start, time_end, and comment sections are preserved in the result list.

Created: 2012-02-13 | Last updated: 2012-02-14

Credits: Anja Le Blanc

Propagation of the Solar Energetic Particl... (2)

• Download

use of the processing service to calculate time delays to the planets Inputs: time when propagation should start longitude of starting point on the sun speed of the solar wind error value of solar wind speed traveling speed of energetic particals as percentage of the speed of light

Created: 2011-12-13 | Last updated: 2012-02-03

Credits: Anja Le Blanc HELIO

Propagation of the Co-roationg interaction... (2)

• Download

use of the processing service to calculate time delays to the planets Inputs: time when propagation should start longitude of starting point on the sun speed of the solar wind error speed of the solar wind

Created: 2011-12-13 | Last updated: 2012-02-03

Credits: Anja Le Blanc

Connect flare events with proton events on... (2)

• Download

This workflow uses flares listed in any HELIO HEC flare catalogue (using the semantic mapping service), checks whether these flares are connected to Earth via the Parker spiral, and looks for proton events at earth listed in the goes_proton_event list. The flare listing and the proton listing are combinded into a list of VOTable outputs (one VOTable per flare catalogue with results).

Created: 2011-12-09 | Last updated: 2011-12-13

Credits: Anja Le Blanc

Attributions: Connect flare events with proton events on Earth via propagation model

Associate a Shock at Earth with Flare and ... (2)

• Download

Using start date and end date all shock events at Earth are backpropagated to the Sun. Arround the time all flares (above certain levels) and cmes are assoicated. The possition of the flare and speed of the CME are used to forward propagate the event to Mars.

Created: 2011-11-15 | Last updated: 2012-07-20

Credits: Anja Le Blanc David PS

Connect flare events with proton events on... (4)

• Download

This workflow uses flares listed in the goes_sxf_flare list, checks wether this flare is connected to Earth via the Parker spiral, and looks for proton events at earth listed in the goes_proton_event list. The flare listing and the proton listing is combinded into a VOTable output.

Created: 2011-11-15 | Last updated: 2012-05-15

Credits: Anja Le Blanc

Find source at Sun of SW events on Earth (5)

• Download

Try to detect the solar wind source on the Sun. Use backpropagation, ILS, HEC and HFC.

Created: 2011-11-15 | Last updated: 2012-05-24

Credits: Anja Le Blanc David PS

Basic Call of HELIO Coordinate Transformat... (2)

• Download

Transforms an input VOTable Coordinate set to a specified output VOTable Coordinate set. This workflow performs some remote computation and may take some time to complete.

Created: 2011-11-09 | Last updated: 2012-07-09

Credits: Anja Le Blanc

Attributions: Basic Call of HELIO Coordinate Transformation Service

Basic Call of HELIO Coordinate Transformat... (1)

• Download

Transforms an input VOTable Coordinate set to a specified output VOTable Coordinate set. This workflow performs some remote computation and may take some time to complete.

Created: 2011-11-08 | Last updated: 2011-11-08

Credits: Anja Le Blanc

Find periods of time where two ILS objects... (2)

• Download

Inputs: name of target_obj of ILS of two objects and a number of degrees which these obejcts are allowed to be appart in hci longitude coordinates. Output VOTable of time periods where these two objects are closer than +/- input angle together.

Created: 2011-11-04 | Last updated: 2011-11-18

Credits: Anja Le Blanc

Find instruments of a special type in a se... (1)

• Download

This workflow takes a type of isnstrument as input and the minimum and maxium coordinates in HCI as input. Cadence for the location service is for defining the 'continues' presence. Output is a VOTable based on the ICS return where two columns are added for the time this instrument has entered and exited the Region of Interest.

Created: 2011-08-24 | Last updated: 2011-08-24

Credits: Anja Le Blanc

Attributions: Find instruments of a special type in a section of space described in HCI coordinates

Find instruments of a special type in a se... (1)

• Download

This workflow takes a type of isnstrument as input and the minimum and maxium coordinates in HCI as input. Cadence for the location service is for defining the 'continues' presence. Output is a VOTable based on the ICS return where two columns are added for the time this instrument has entered and exited the Region of Interest.

Created: 2011-08-24 | Last updated: 2011-08-24

Credits: Anja Le Blanc

Find common events in HEC tables which use... (5)

• Download

Use only tables which provide lat_hg and long_hg. Inputs: table names of two HEC tables; time interval in which the search is being conducted; delta for time and location to enlarge the search space. Output: VOTable which combines the resultset of the HEC by the common event.

Created: 2011-08-03 | Last updated: 2012-02-03

Credits: Anja Le Blanc

MDES simple execution (2)

• Download

workflow to query MDES, obtaining the DES results and from it extracting the VOTable and the PNG plot for the time range queried.

Created: 2011-03-02 | Last updated: 2014-03-12

Credits: Anja Le Blanc

Converting from coordinates in longitude l... (1)

• Download

Based on lonlat2xy.pro Converts from Helioprojective-Cartesian Coordinate System to Stonyhurst Heliographic Coordinate SystemBased on lonlat2xy.pro http://hesperia.gsfc.nasa.gov/ssw/gen/idl/solar/lonlat2xy.pro Converts from Helioprojective-Cartesian Coordinate System to Stonyhurst Heliographic Coordinate System

Created: 2011-03-02 | Last updated: 2011-03-02

Credits: Anja Le Blanc

Extract content of columns from VOTables (3)

• Download

Extracts all values from all columns which are passed from the input ColumnNames

Created: 2011-02-24 | Last updated: 2012-08-20

Credits: Anja Le Blanc

Associate flares with active regions (1)

• Download

This workflow is querying the HFC ActiveRegions list and HEC flare lists (names retrieved from the ontlogoy) It requires a time periode and a search radius arround the centre of an Active Region as inputs It produces two outputs: HFCout is a modified VOTable where a field per flare list is added with the number of associated flares. combined_output is a 2 dimensional list with an VOTable for each Active region and each one with an VOTable for all associated flares for that Active Region.

Created: 2011-02-22 | Last updated: 2011-08-24

Credits: Anja Le Blanc

Attributions: Associate goes X ray flares with active regions Associate hessi flares with active regions

Associate goes X ray flares with active r... (1)

• Download

This workflow is querying the HFC ActiveRegions list and HEC goes_xray_flare list. It requires a time periode and a search radius arround the centre of an Active Region as inputs It produces two outputs: HFCout is a modified VOTable where a field is added with the number of associated hessi flares. combined_output is a 2 dimensional list with an VOTable for each Active region and one with an VOTable for all associated flares for that Active Region.

Created: 2011-02-18 | Last updated: 2011-02-18

Credits: Anja Le Blanc

Converting from heliocentric coordinate sy... (1)

• Download

Converting from heliocentric coordinate system with coordinates in arcsec to coordinates in longitude latitude Based on the IDL script xy2lonlat.pro http://hesperia.gsfc.nasa.gov/ssw/gen/idl/solar/xy2lonlat.pro Stonyhurst Heliographic Coordinate System to Helioprojective-Cartesian Coordinate System

Created: 2011-02-18 | Last updated: 2011-02-18

Credits: Anja Le Blanc

Calculate Sun data from date (2)

• Download

caluculates B0 (radians), position angle and sun radius (arcsec) B0 - heliographic latitude of the centre of disk position angle - of the north end of the axis of rotation, measured +ve if east of the north point of the disk radius - the apparent radus of the Sun in arcsec This is created using the calculations from the IDL routine get_sun.pro

Created: 2011-02-15 | Last updated: 2011-03-02

Credits: Anja Le Blanc

Associate hessi flares with active regions (3)

• Download

This workflow is querying the HFC ActiveRegions list and HEC hessi_flare list. It requires a time periode and a search radius arround the centre of an Active Region as inputs It produces two outputs: HFCout is a modified VOTable where a field is added with the number of associated hessi flares. combined_output is a 2 dimensional list with an VOTable for each Active region and one with an VOTable for all associated flares for that Active Region.

Created: 2011-02-11 | Last updated: 2011-10-24

Credits: Anja Le Blanc

retrive dpas data for all ics instruments ... (1)

• Download

This workflow demonstrates the standard query where events for a period of time are requested from the HEC service, available instruments for this time come from the ICS and data only for the times of the events are requested from the DPAS. In this version data from only 3 random events (out of the HEC list) will be requested from the DPAS.

Created: 2010-09-14 | Last updated: 2010-09-14

Credits: Anja Le Blanc

Attributions: retrive dpas data for all ics instruments for HEC event data

retrive dpas data for all ics instruments ... (1)

• Download

This workflow demonstrates the standard query there events for a period of time are requested from the HEC service, available instruments for this time come from the ICS and data only for the times of the events are requested from the DPAS.

Created: 2010-09-14 | Last updated: 2010-09-14

Credits: Anja Le Blanc

Attributions: Extracting data from VOTable format by using XPath query Retrieve all data for all instruments for a given periode of time

instruments in sxr and euv spectrum (1)

• Download

ICS use case 5

Created: 2010-08-20 | Last updated: 2010-08-20

Credits: Anja Le Blanc

Call VSO web service with HELIO input data (1)

• Download

  date transformation from 2000-10-02T23:00:00 to 20001002230000 HELIO instrument names as in http://helio-dev.i4ds.ch/xsd/instruments.xsd spitt into source and instrument names; if these pair don't exist only first part (source) is tried.

Created: 2010-08-04 | Last updated: 2010-08-04

Credits: Anja Le Blanc

Extracting data from VOTable format by usi... (1)

• Download

Input VOTable and 'name' of a Output corrosponding data of that field in an arrayInput VOTable and 'name' of a Field

Created: 2010-07-01 | Last updated: 2010-07-01

Credits: Anja Le Blanc Donal Fellows

Using HEK information to get DPAS data (1)

• Download

Query HEK for all kinds of events and query DPAS for given instrument for data from event times.

Created: 2010-06-10 | Last updated: 2010-06-10

Credits: Anja Le Blanc

Simple DPAS query (4)

• Download

queries dpas for each time priode and instrument

Created: 2010-05-26 | Last updated: 2011-12-15

Credits: Anja Le Blanc

Retrieve Instruments for event dates (2)

• Download

Queries the HELIO ICS web service and returns a list of instruments available for the time periodes in VOTable format

Created: 2010-05-26

Credits: Anja Le Blanc

simple HEC query (2)

• Download

HEC query for table 'goes_xray_flare'

Created: 2010-05-21 | Last updated: 2010-08-04

Credits: Anja Le Blanc

retrieve data for all instruments for even... (1)

• Download

This workflow uses the HEC to retrieve events for a time spane given by the user from a HEC table given by the user as well. It uses all instruments available in the DPAS to retrieve data for the events Output: XML as returned by the DPASThis workflow uses the HEC to retrieve events for a time spane given by the user from a HEC table given by the user as well. It uses all instruments available in the DPAS to retrieve data for the events; empty results are filtered out, the data is combind wi...

Created: 2010-04-21

Credits: Anja Le Blanc

Attributions: DPAS general query HEC standard query Retrieve all data for all instruments for a given periode of time

DPAS general query with sorted field (1)

• Download

same as DPAS general query. Calling the DPAS sortedQuery web service. additional input: partialSorting input boolean true or false false all result entries are sorted by start measurementTime true each request is sorted by measurement time; no overall time order, but queries stay in the order they there asked.

Created: 2010-04-19 | Last updated: 2010-04-19

Credits: Anja Le Blanc

DPAS general query (1)

• Download

general query to DPAS; it gets a list of instruments and lists for start and stop times; for a query hessiEC, phoenix2; start times 2001-01-01 00:00:00, 2005-04-01 00:00:00; stop times 2001-01-05 00:00:00, 2005-05-1 00:00:00 it would perform to queries: hessiEC from 2001-01-01 00:00:00 to 2001-01-05 00:00:00 and phoenix2 from 2005-04-01 00:00:00 to 2005-05-1 00:00:00 There is only one output file with the results from both queries.

Created: 2010-04-19 | Last updated: 2010-04-19

Credits: Anja Le Blanc

HEC standard query (1)

• Download

calls the HEC web service; inputs are start and stop time, which table should be queried and an optional where clause, as in an SQL statement output is of VOTable format

Created: 2010-04-16

DPAS simpel query workflow (1)

• Download

call of the simpleQuery web service; all inputs are requested from the user; xml list as output file format

Created: 2010-04-16

Retrieve all data for all instruments for ... (3)

• Download

This workflow looks up all instruments known to have worked during the requested periode of time (ICS), restructures results to make them fit instruments.xsd and requests data for this periode from DPAS. Result: VOTable with list of URLs to data.

Created: 2010-04-15 | Last updated: 2010-08-09

Credits: Anja Le Blanc

Attributions: Extracting data from VOTable format by using XPath query

find events in xray and radio (7)

• Download

instruments: hessiEC, phoenix2 attention: hessi name has changed!

Created: 2010-03-16 | Last updated: 2010-03-16

Credits: Anja Le Blanc

retrieving solar monitor urls for votable ... (1)

• Download

No description

Created: 2009-11-12 | Last updated: 2009-11-12

Credits: Anja Le Blanc